Non-ignorable protection work of vortex steam flowmeter.

The vortex flowmeter is mainly used to measure the flow of medium fluid in industrial pipelines, including the volume flow of gas, steam, or liquid. It is easy to be blocked by the measured medium in daily work and affect the normal measurement. Therefore, the owner needs to make a good vortex flow. Routine maintenance and maintenance of the flowmeter.

Vortex Flow Meter

1. The vortex flowmeter probe should be cleaned regularly. During the inspection, it was found that the detection holes of individual probes were blocked by dirt or even wrapped in plastic cloth, which affected the normal measurement cases;

2. Regularly check the grounding and shielding of the vortex flowmeter to eliminate external interference, sometimes indicating that the problem is caused by interference;

Vortex flowmeter case

3. Carry out daily protection for the use of the flowmeter, protect the inner lining of the flowmeter, reduce the contact of oily substances, and avoid affecting the insulating lining of the flowmeter. At the same time, avoid hard bruises and damage to the surface finish;

4. The vortex flowmeter is installed in a humid probe. It should be dried regularly or treated with moisture-proof. Because the probe itself is not treated with moisture-proof treatment, it will affect the operation after being damp;