Ultrasonic flowmeter

Accuracy: Better than 1%

Type: Walll mounted clamped on ultrasonic flowmeter

Pressure: 0.6~4.0Mpa

Main power: AC220V 50HZ /DC24V

Display: High visible backlit LCD for easy operation

Wall mounted (1)


Widely used for water supply, non conductive liquid such as the distilled water, food oil &light oil, boiler fuel oil engine for diesel measurement, and air conditioner system to measure the flow & heat, food and beverage, pharmaceutical, ballast water, fuel consumption and other processes on-board ships,etc.

Wall mounted (2)

Wall mounted (3)

Wall mounted (4)

Wall mounted (5)

Wall mounted (6)

Wall mounted (7)

Wall mounted (8)


Accuracy±1% of reading at rates >0.2 mps
PrincipleTransmit time
Pipe SizeDN15mm-DN6000mm
DisplayLCD with backlight, display accumulated flow/heat, instantaneous flow/heat, velocity, time etc.
Signal Output1 way 4-20mA output
1 way OCT pulse output
1 way relay output
Signal Input3 way 4-20mA input achieve to heat measurement by connecting PT100 platinum resistor
Other FunctionsAutomatically record the positive,negative,net totalizer flow rate and heat. Automatically record the time of power-on/off and flow rate of the last 30 times.Replenish by hand or read the datas through Modbus communication protocol.
Pipe MaterialCarbon Steel, stainless steel, cast iron, cement pipe, copper, PVC, aluminum, FRP etc. Liner is allowed
Straight Pipe SectionUpstram: 10D;  Downsteam:5D;  From the pump:30D (D means outer diameter)
Liquid TypesWater, sea water, industrial sewage, acid & alkali liquid, alcohol, beer, all kinds of oils which can transmit ultrasonic single uniform liquid
Liquid TemperatureStandard: -30℃ ~ 90 ,High-temperature:-30 ~ 160
Liquid TurbidityLess than 10000ppm, with a little bubble
Flow DirectionBi-directional measuring, net flow/heat measuring
Environment Temperature Main Unit: -30℃ ~ 80
Transducer: -40 ~ 110, Temperature transducer: select on enquiry
Environment HumidityMain Unit: 85% RH
Transducer: standard is IP65, IP68(optional)
CableTwisted Pair Line, standard length of 5m, can be extended to 500m (not recommended); Contact the manufacturer for longer cable requirement. RS-485 interface, transmission distance up to 1000m
Power SupplyAC220V and DC24V
Power ConsumptionLess than 1.5W
CommunicationMODBUS RTU RS485


Wall mounted (9)

Wall mounted (10)

Wall mounted (11)

Wall mounted (12)

Wall mounted (13)Wall mounted (14)